May 28 , 2020
350ML ABS Table Stand Foaming Dispenser
Operation*Open the Soap Tank by rotating it gently in the counter-clockwise direction.
*Open the battery cover, correctly insert 4 AA alkaline batteries. Observing the polarities in the battery compartment, then close the battery cover.
*Pouring the desired amount of liquid (must) into the soap tank, then rotate the tank gently in the clockwise direction to fix it.
*Power on: Press the Power Button once to switch it on (White indicator light flashes once) Power off: Press the Power Button once to switch it off (Red indicator light flashes once)
*Now you can enjoy the ideal foam by placing your hand under the sensor (distance ≤ 6 cm)
Battery Replacement And Installation Instructions
*Open the soap tank by rotating it gently in the counter-clockwise direction.
*Open the battery cover, correctly insert 4 AA alkaline batteries and make sure the polarity is correct. DO NOT mix the old batteries with the new ones.
*Close the battery cover.
*Please remove the batteries if the unit is not used for long to avoid damage.
*Remarks: If the indicator flashed but appliance doesn't work, please check whether the batteries are installed backward, then adjust the batteries' direction according to the diagram correctly.
